Best Blockchain RPC Providers for Crypto Payments in 2026

11.11.2026

16 min read

Best Blockchain RPC Providers for Crypto Payments in 2026

For a payment team that needs Ethereum, Base, TRON and Solana from one account, Chainstack is our editorial pick in 2026. It covers all four networks, bills 1 request unit per standard call and 2 for archive, debug and trace, and offers a 99.9% uptime SLA on Enterprise. Dwellir and Tatum follow. Alchemy and QuickNode have the broadest tooling, but on our deposit-monitoring workload their method-weighted pricing comes out higher. 

We looked at six blockchain RPC providers the way a payment team would: network coverage, the cost of one deposit-monitoring workload and what happens when a node fails. And if you'd rather not run this layer at all, we show where a payment gateway like 0xProcessing, with free automated stablecoin conversion, fits in.

What is RPC in blockchain?

RPC stands for remote procedure call. It’s the channel your application uses to ask a blockchain node for data, like the latest block or the receipt for a given transaction. The request goes to a JSON-RPC endpoint, and the node replies from its own copy of the chain.

Every wallet, exchange and payment system depends on it. A checkout can't confirm a USDT deposit without asking a node whether the transfer is in a block, and the answer can only be as fresh as that node is.

How a blockchain RPC call works

Requests travel over a plain HTTP POST, or over a WebSocket subscription if you want the node to push updates to you. Every EVM chain, Ethereum included, uses the same method set, so eth_blockNumber, eth_getLogs and eth_getTransactionReceipt work the same way everywhere. TRON is different. It has its own HTTP API, with an Ethereum-compatible JSON-RPC gateway next to it. Solana has methods of its own too, getSignaturesForAddress and getSignatureStatuses among them.

Running your own RPC node on every chain is close to a full-time job, so most teams rent access from blockchain node providers instead. An RPC node provider gives you a shared RPC endpoint billed per request, or dedicated nodes reserved for you.

RPC vs indexer vs payment gateway

These three layers often get mixed up:

RPC provider 

Raw access to node data. It tells you what's in a block, but not which transfers belong to your customers.

Indexer or notification service 

Watches the chain for you and pushes events, such as "address X received USDC". It's convenient, but it adds one more dependency between the chain and your ledger.

Payment gateway 

Handles the whole flow: it issues addresses, matches transfers to invoices, waits for finality, screens funds and credits a merchant balance.

If you're building payment infrastructure yourself, you'll need the first layer and probably the second. If you just want to accept crypto, a crypto payment API takes all three off your plate.

How we compared

We ranked providers for one job: watching stablecoin deposits on Ethereum, Base, TRON and Solana. Each provider was checked against three criteria, applied in this order:

  1. Billing predictability. Does a call cost the same no matter which method you use? Deposit monitoring leans on eth_getLogs and history queries, so per-method weights make the bill harder to forecast.
  2. Network coverage. Are all four networks available on one account, including the TRON endpoints needed to read solidified blocks?
  3. Cost and reliability. What does our deposit-monitoring workload cost on public plans, and is there a published uptime SLA and documented failover? This criterion breaks ties within a group.

That gives three groups. Chainstack, Dwellir and Tatum don't weight calls by method and cover all four networks. OnFinality doesn't weight calls either, but TRON isn't listed on its pricing page. Alchemy and QuickNode weight calls by method.

We left out single-network providers such as TronGrid (TRON only) and Helius (Solana only), since a payment team that needs four chains would still need a second vendor. Infura and Ankr weren't included because we couldn't verify them against the same four-network checklist from public documentation at the time of writing.

Disclosure: Chainstack lists 0xProcessing in its own ranking of crypto payment APIs. The criteria and cost model above apply to every provider in the same way.

Blockchain RPC providers comparison: pricing, rate limits and supported networks

Providers are listed in ranking order.

Provider

Best for

Ethereum / Base / TRON / Solana

Free tier

Pricing (entry paid plan)

Rate limit

Billing model

SLA

1. Chainstack

Multi-chain deposit monitoring

Yes / Yes / Yes / Yes

3M RU, 25 RPS

Growth $49: 20M RU

250 RPS 

1 RU per standard call, 2 RU for archive, debug and trace

99.9% on Enterprise

2. Dwellir

Flat per-response billing

Yes / Yes / Yes / Yes

100,000 responses a day, 20 RPS

Developer $49: 25M responses

100 RPS

1 response = 1 credit

Not published

3. Tatum

Fixed-RPS budgets on TRON

Yes / Yes / Yes / Yes

100,000 credits

Dedicated key $99

10 RPS per key, one network per key

Dedicated keys: flat per RPS. Shared: credits per call

Not published

4. OnFinality

Low-cost EVM and Solana

Yes / Yes / Not confirmed / Yes

400,000 units a day, 40 per second

Growth $49: 20M units

200 per second

Response units

Not published

5. Alchemy

Developer tooling

Yes / Yes / Yes (HTTP API) / Yes

30M CU a month, 15 RPS

Pay As You Go: $0.525 per 1M CU

10,000 CU/s

Compute units, weighted by method

Enterprise only

6. QuickNode

Add-on marketplace

Yes / Yes / Yes / Yes

10M credits, 15 RPS

Build $49: 80M credits

50 RPS

API credits, weighted by method

Uptime SLA on Enterprise

Sources: Chainstack, Dwellir, Tatum, OnFinality, Alchemy and QuickNode pricing pages, checked 11 November 2026. 

Want to accept crypto payments on your website?

Chainstack: best for multi-chain deposit monitoring

Chainstack serves all four networks under one account. On TRON, it exposes the HTTP wallet API, the Solidity node API, the JSON-RPC gateway and gRPC. Its Global Nodes are documented to reroute traffic away from nodes that go down or fall behind, and Chainstack lists SOC 2 Type II and ISO 27001 on its security page.

  • Pricing: Growth costs $49 for 20M RU, about $2.45 per million RU at full use. Extra RU cost $15 per million.
  • Rate limits: 250 RPS on Growth, with a separate 50 RPS limit for Solana mainnet.
  • SLA: 99.9% uptime on Enterprise.
  • Limitation: archive, debug and trace calls cost 2 RU. For steady high volume, the Unlimited Node add-on charges a flat monthly fee instead.

Why it ranks first: Chainstack and Dwellir tie on billing, coverage and cost. Chainstack wins the tie-break with a published SLA and documented failover from lagging nodes.

Dwellir: best for flat per-response billing

Dwellir charges one credit per response, with trace, debug and WebSocket notifications all at the same rate, so the bill is easy to predict.

  • Pricing: Developer costs $49 for 25M responses. On Scale, overage falls to $2 per million.
  • Rate limits: 100 RPS on Developer.
  • SLA: we couldn't find a published uptime SLA or documented failover policy.
  • Limitation: fewer add-ons and SDKs than the largest providers.

Tatum: best for fixed-RPS budgets on TRON

Tatum covers all four networks, and its dedicated keys sell throughput rather than calls, so a busy month costs the same as a quiet one.

  • Pricing: a dedicated key costs $99 a month for 10 RPS, up to $1,049 for 100 RPS. Each key serves one network.
  • Rate limits: set by the key you buy.
  • SLA: no published uptime SLA found.
  • Limitation: four chains need four keys, the most expensive option in our workload.

OnFinality: best for low-cost EVM and Solana

OnFinality offers managed Ethereum, Base and Solana endpoints at a low entry price.

  • Pricing: Growth costs $49 for 20M units.
  • Rate limits: 200 per second on Growth.
  • SLA: no published uptime SLA found.
  • Limitation: a USDT-on-TRON flow would need a second provider.

Alchemy: best for developer tooling

Alchemy has the deepest developer tooling here, including enhanced APIs, webhooks and SDKs, and it supports TRON through its HTTP API.

  • Pricing: Pay As You Go at $0.525 per 1M CU. Per Alchemy's CU table, eth_getLogs costs 60 CU, eth_blockNumber 10, a receipt 20, getSignaturesForAddress 40 and a TRON HTTP call 20.
  • Rate limits: 10,000 CU/s on Pay As You Go, so real RPS depends on the method mix.
  • SLA: a signed SLA on Enterprise only.
  • Limitation: log queries cost six times as much as a block-height check, which adds up in EVM deposit monitoring.

QuickNode: best for an add-on marketplace

QuickNode has the widest marketplace of add-ons and supports TRON through the HTTP API, JSON-RPC and gRPC.

  • Pricing: Build costs $49 for 80M credits. QuickNode's credit tables list eth_getLogs at 20 credits on Ethereum and Base.
  • Rate limits: 50 RPS on Build.
  • SLA: support response times by plan, uptime SLA on Enterprise.
  • Limitation: a 10M-call month uses around 200M credits, more than Build includes.

Building crypto payments without running RPC infrastructure? 0xProcessing runs its own nodes and provides a payment API and webhooks for tracking incoming payments and withdrawals across 100+ cryptocurrencies and 20+ networks. You get one integration instead of four chains to watch.

Get started

Network coverage through a payment team's eyes

"Supports TRON" on a pricing page doesn't mean your deposit flow will work. A payment team checks the token-and-network pair, not the chain. For every pair you accept, you need answers to four questions:

  1. Can I read transfer events for this token contract, or only native transfers?
  2. Can I get a transaction's final status, not just "seen in a block"?
  3. How far back can I query history to backfill a gap?
  4. What limits apply to the specific method I'll call most, such as block range, page size or rate?

USDT on TRON

USDT on TRON is a TRC-20 token, contract TR7NHqjeKQxGTCi8q8ZY4pL8otSzgjLj6t. A deposit shows up as a Transfer event in the transaction info, not as a native TRX transfer. TRON produces a block every 3 seconds. Once enough super representatives have confirmed it, typically within about a minute, a TRON block is solidified and can’t be reversed.

So there are two things to ask a provider. Does it expose the walletsolidity endpoints, so you only credit solidified transactions? And can you pull transaction info by block number when a gap needs backfilling? Chainstack, QuickNode, Tatum and Alchemy document both. That's why accepting USDT on TRON is mostly a question of reading the right endpoint.

USDC on Solana

USDC on Solana is an SPL token, mint address EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v. Funds land in the recipient's associated token account, so that's the address you watch, not the wallet address. Slots run roughly every 400 ms. Solana has three commitment levels – processed, confirmed and finalised. Finalised is the conservative threshold for crediting. Confirmed is faster and carries a small rollback risk, so the choice depends on the amount at stake.

For backfill, getSignaturesForAddress pages back through history, but how far back depends on whether the provider serves archive data for Solana. Ask before you need it. More on that in our guide to accepting USDC.

EVM chains: Ethereum and Base

On Ethereum and Base, a USDT or USDC deposit appears as a Transfer log from the token contract, and you find it with eth_getLogs by filtering on the contract address and topic. Each provider limits how many blocks one call can cover. That limit often changes from plan to plan, so check it before you decide how often to poll. 

Inclusion in a block and finality are two different moments. Ethereum reaches finality after two epochs, roughly 13 minutes, and that's the conservative point to credit. A Base block is included within seconds, but it only becomes final once the batch holding it is finalised on Ethereum. Many teams credit earlier, after a set number of confirmations, so set the threshold for each network separately. 

What happens to a deposit when your RPC fails

Uptime figures say little about the failure you don't notice. Here's one deposit traced from detection to credit, with the provider's job and your application's job separated.

Step by step: from detection to credit

Detection

Your service listens on a WebSocket subscription for Transfer events to deposit addresses. Provider: delivers the event. Application: stores the event key.

Subscription drops

WebSockets disconnect without warning. Application: move the checkpoint only after a whole block or range has been processed, because one block can hold several transfers. On reconnect, re-read the boundary block and let deduplication drop what you've already seen.

Backfill

From the checkpoint, query up to the current head with eth_getLogs, TRON block info or getSignaturesForAddress. Provider: archive access and a usable block-range limit. Application: paging and retries.

Deduplication

The same transfer may arrive twice, once from the live stream and once from backfill. Application: make crediting idempotent. On EVM chains, key each transfer by chain ID, transaction hash and log index. On Solana, one transaction can carry several transfers, so use the signature together with the instruction's position inside it.

Finality check

Before crediting, check the transaction against the threshold you set for that network: finalised or a set number of confirmations on Ethereum and Base, solidified on TRON, finalised or confirmed on Solana. A chain reorg can drop a block your node already showed you.

Reconciliation

Match the on-chain record to the invoice in your internal ledger: amount, token, network and address. Flag underpayments and unknown transfers for review.

The provider gives you data and failover. Idempotency, finality rules and payment reconciliation stay in your code, whichever provider you pick.

The HTTP 200 failure

Say the load balancer sends your request to a stale node that’s 40 blocks behind the head. You ask it for logs from the latest blocks. Depending on the node and the provider, it may answer 200 OK with an empty array instead of an error, and your monitor marks the range as done.

The customer has paid, yet the deposit never shows up in your system. Preventing this costs very little. Check the block height of the node that served the request against a second endpoint or a public explorer, and only move the checkpoint once the range is fully processed. Chainstack documents that its Global Nodes reroute requests away from nodes that fall behind, and other providers offer similar failover. Even so, a checkpoint that respects the node's own head is the application's safety net.

What a payment monitoring workload costs

To compare prices fairly, we modelled one workload against every provider's public pricing. The breakdown below shows every assumption, so you can rerun it with your own numbers.

The scenario

A merchant watches stablecoin deposits on Ethereum, Base, TRON and Solana over a 30-day month.

Network

Methods

Calls a month

Peak RPS

Ethereum

eth_getLogs every 5 s (0.52M), eth_blockNumber (0.75M), eth_getTransactionReceipt (0.75M), backfill with eth_getLogs (0.125M), retries (0.125M)

2.27M

10

Base

eth_getLogs every 5 s (0.52M), eth_blockNumber (0.75M), eth_getTransactionReceipt (0.75M), backfill with eth_getLogs (0.125M), retries (0.125M)

2.27M

10

TRON

Block info, transaction info and solidified state (3M), backfill and retries (0.25M)

3.25M

10

Solana

getSignaturesForAddress (1M), getSignatureStatuses and subscription notifications (1M), backfill and retries (0.25M)

2.25M

10

Total

~10M

40

Our assumptions:

  • WebSocket notifications count as calls.
  • Retries are billed like normal calls, which is the conservative case.
  • Backfill calls (0.5M) are treated as historical, so they bill 2 RU on Chainstack.
  • The 30% reserve is added to monthly volume, not to peak RPS.

Estimated monthly cost

Provider

How the scenario bills

Units needed (with 30% reserve)

Plan that fits

Monthly cost

1. Chainstack

9.5M × 1 RU + 0.5M × 2 RU = 10.5M RU

~13.7M RU

Growth: 20M RU, 250 RPS

49(40 billed annually), no overage

2. Dwellir

10M responses × 1 credit, notifications included

13M responses

Developer: 25M, 100 RPS

$49

3. Tatum

Dedicated keys priced by RPS, one network per key

4 keys × 10 RPS

Four 10 RPS keys

$396

4. OnFinality

6.75M responses (Ethereum, Base, Solana)

~8.8M units

Growth: 20M, 200 per second

$49, partial cost: TRON not covered

5. Alchemy

~272M CU by method (see note) × $0.525 per 1M CU

~354M CU

Pay As You Go, 10,000 CU/s

~$186

6. QuickNode

10M calls × 20 credits = 200M credits

~260M credits

Accelerate: 450M, 125 RPS

$249

Estimates based on public pricing pages as of 11 November 2026. Alchemy: ~68.7M CU each for Ethereum and Base, ~65M for TRON and ~70M for Solana at the CU rates above, with retries counted at the highest rate. QuickNode: the 20-credit rate from its Ethereum and Base tables is applied to TRON and Solana, since their per-method tables weren't public. Actual bills depend on the method mix and negotiated terms.

The gap comes from how each call is counted. On Chainstack and Dwellir, a call is one unit. Alchemy weights log and history queries highest, and QuickNode charges 20 credits per call, so the same workload costs roughly four and five times as much.

How to choose an RPC provider for crypto payments

Run each candidate through this checklist before you sign:

  • Does it serve every token-and-network pair you accept, not just the chain?
  • Can you read finalised or solidified state directly?
  • What's the block-range or page limit on your most-used method?
  • How far back does archive access go on each network?
  • Are WebSocket subscriptions available on your plan?
  • How does pricing weight eth_getLogs and historical calls?
  • What's the RPS limit, and what happens when you hit it?
  • Is there automatic failover away from lagging nodes?
  • Is the uptime SLA published, and on which plan?
  • Can you get SOC 2 or ISO 27001 reports if compliance asks?

To sum up

For most payment teams, the best RPC providers are those that don’t charge extra for the calls deposit monitoring runs on. Chainstack takes first place in our ranking. A single account gives you Ethereum, Base, TRON and Solana, a standard call costs 1 RU, our scenario fits the $49 Growth plan, and a 99.9% uptime SLA is available on Enterprise. Dwellir matches it on cost, and Tatum suits teams that would rather budget by fixed RPS.

Whichever web3 RPC provider you pick, part of the work stays on your side. You’ll still keep checkpoints, run backfills, credit each deposit only once, apply finality rules and reconcile against your ledger. Solid RPC infrastructure means that logic kicks in less often, but you still have to write it. 

If running nodes and writing deposit logic isn't your core business, a gateway does it for you. Check our guide to the best USDT payment gateways to see what that looks like in practice.

Want stablecoin deposits without the RPC layer? 0xProcessing runs its own nodes and provides a payment API and webhooks for tracking incoming payments and withdrawals across 100+ cryptocurrencies and 20+ networks. Mass payouts carry
no processing fee, only the network fee for on-chain transfers.

Get started

FAQ

What are the top blockchain RPC providers?

For crypto payments in 2026, the leading providers are Chainstack, Dwellir, Tatum, OnFinality, Alchemy and QuickNode. Chainstack is our top pick for multi-chain payment monitoring, because it covers Ethereum, Base, TRON and Solana without weighting calls by method.

What is RPC in blockchain?

RPC, or remote procedure call, is the interface an application uses to read data from a blockchain node and send transactions. Requests go to a JSON-RPC endpoint over HTTP or WebSocket, and the node returns blocks, balances, logs or transaction receipts.

Does Ethereum use RPC?

Yes. Every Ethereum client exposes a standard JSON-RPC API with methods such as eth_blockNumber, eth_getLogs and eth_sendRawTransaction. Wallets, dApps and payment systems all reach Ethereum through it, either via their own node or through an RPC provider.

Which Solana RPC provider is the best?

It depends on the workload. For payment monitoring, look for finalised commitment support, archive access for getSignaturesForAddress and stable WebSocket subscriptions. Chainstack, Dwellir, Alchemy and QuickNode all offer managed Solana endpoints. Chainstack and Dwellir make costs easier to predict, since neither weights calls by method. If Solana is your only network, single-chain specialists such as Helius are also worth a look.

Lucas Anderson

Lead Writer

Lucas Anderson